Symbol Technologies PPT 2800 - Manual (Page 21)

19
Q u i c k R e f e r e n c e
sure the volume is not turned down.
PPT 2800 terminal turns itself off:
• Your PPT 2800 terminal turns off after a period of inactivity.
This period can be set from one to five minutes, in one-
minute intervals. Check the Power dialog box (in the Sys-
tem tab under Start/Settings), and change the setting if you
need a longer delay before the automatic shutoff feature ac-
tivates.
PPT 2800 terminal doesn’t recognize my handwriting:
• For your PPT 2800 to recognize handwriting input with the
stylus, characters must be written a certain way. See the
PPT 2800 Product Reference Guide for information about
how to write character strokes.
• Make the character strokes in the lower character entry area
on the screen — not on the display part of the screen.
• Make sure you are writing upper-case letters in the left-hand
side, numbers in the right-hand side, and lower-case letters
in the center of the writing area.
Tapping the screen buttons or icons does not activate the
corresponding feature:
• Align the screen. Choose Align Screen from the System tab
under Start/Settings, or hold down the Function button and
press the Action button.
A message appears stating that your PPT 2800 terminal
memory is full:
• Delete unused memos and records. You can save these
records on your computer.
• Adjust the memory allocation. Select Start, then Settings,
and select the System tab. Tap Memory and adjust the slid-
er.