Silvercrest KH 2321 - Manual (Page 6)

- 6 -
Setting the clock
When you first take the appliance into
use after inserting the battery:
➪ To set the time, press the rotating
switch CLOCK SET ቩ in and turn it
until the correct time is shown in the
display.
➪ When done, pull the rotating switch
CLOCK SET ቩ back out.
Notice: The analoge clock only func-
tions with an inserted battery.
Clockface illumination
The clockface illumination can be switched
on and off with the switch CLOCK LIGHT
ON / OFF
ቪ .
Adjusting the alarm timings
If the clock is set correctly, as described
above:
➪ Adjust the alarm time by turning the
rotating switch ALARM SET ቫ.
Switching the alarm on and off
➪ The alarm is activated when the button
ALARM ON/OFF ቢ is in a raised posi-
tion.
➪ To deactivate the alarm, press the
button ALARM ON/OFF ቢ back down.
Radio Reception
➪ Turn the rotating switch ብ to the
position FM or AM.
➪ Turn the volume adjuster VOLUME ቦ
to a central position.
➪ Now tune in to the desired radio station,
by turning the TUNING adjuster ቤ.
NOTE: To improve the reception of
radio stations transmitting in FM
frequencies, move the end of the
wire aerial
ቮ slowly in various direc-
tions. When you have found the best
reception from the desired transmitter,
fix the wire aerial into this position
e.g. with adhesive tape. An aerial is
built into the appliance for the recep-
tion of AM transmitters . For improved
reception, alter the actual position of
the appliance in radio operation.
External audio sources
You can connect external audio sources
to this appliance with a 3,5 mm jack
plug.
• Connect the audio output of the
external audio source to the AUX IN
connection
ተ with a 3,5 mm jack
plug.
• Adjust the rotary switch ብ to the
position AUX.
• The signals from the external audio
source will now be reproduced over
the loudspeakers.
SilverCrest KH 2321
KH2321_Retro_Radio_UK.qxd 31.07.2007 12:34 Uhr Seite 6