Smeg Vitroceramic Cooking Hob SE631C - Manual (Page 9)

16
GB
Deterioration of surface markings is caused
by using abrasive cleaning products or reci-
pients with irregular bases that scrape off the
silk-screened markings.
Pots may stick to the sur face due to a subs-
tance melting between them. Never try to pull
the pot away when cold! This could break the
glass.
Never stand on the glass nor rest your weight
on it as this could break it and lead to cuts.
Do not store objects on top of the glass sur fa-
ce.
FRAME MAINTENANCE
Use a damp cloth or lukewarm soapy water for
cleaning. If the stains are hard to remove use
a special vitroceramic cleaning product or
liquid polish for electrical household applian-
ces. Apply and spread, rubbing the undiluted
product, leave it to take ef fect and remove it
with a dr y cloth. Do not use metallic or synthe-
tic cleaning pads.
Should the hob lose its shine use a polish for
electrical household appliances to help it
regain its original appearance
Troubleshooting
Fault Possible cause Solution
Neither the hotplates
nor the indicators work
The mains cable is Connect the mains cable.
not connected.
The recipient sticks to the
glass
Some meltded substance is Turn the heating zone to
between the recipient and full power and tr y to remove.
the glass.
Recipients with Check the bases of the
aggressive bases recipients and do not slide
then along the glass sur face.