Savin SLP 38c SLP38C - Manual (Page 51)

Setting up Options
45
4
❖ ❖ ❖ ❖ Connecting with the parallel interface cable and the USB exchange cable.
• The computer supports the bidirectional transmissions.
• The Interface cable supports the bidirectional transmissions.
• The printer is connected to the computer using the standard parallel inter-
face cable and the parallel connector.
• On Windows NT 4.0, the [Enable bidirectional support] is selected and [Enable
printer pooling] is not selected under the [ports] tab.
❖ ❖ ❖ ❖ Connecting with the network
• SmartNetMonitor for Client and the TCP/IP protocol are used.
• On Windows NT 4.0, the [Enable bidirectional support] is selected and [Enable
printer pooling] is not selected under the [ports] tab.
• SmartNetMonitor for Client included on the CD-ROM is installed.