Introduction, Co co – Samsung SCC-B2333(P) User Manual

Page 10

Advertising
background image

10 – DIGITAL COLOR CAMERA

Introduction

n

Input/Output Connector

This connector has input and output ports for RS-485 control signals, DAY/NIGHT switching, and alarm
output signals.

No.

Function

Description

1

ALARM OUT

Alarm out port for motion detection. (Open collector type)

2

GND

Grounding Port.

3

GND

Grounding Port.

4

SHUTTER (S0)

This is a port for selecting an external high speed shutter mode.
If connected in LOW (0V), it will become ON inside.

5

SHUTTER (S1)

This is a port for selecting an external high speed shutter mode.
If connected in LOW (0V), it will become ON inside.

6

SHUTTER (S2)

This is a port for selecting an external high speed shutter mode.
If connected in LOW (0V), it will become ON inside.

7

5V OUT

Power supply port for RS-485 JIG. Use within typical DC +5V 100mA

8

DAY/NIGHT IN

This is a port for DAY&NIGHT conversion.
High(DC +3V~+5V) : DAY(COLOR) Mode,
Low(0V) : NIGHT(BW) Mode

9

RS-485 DATA-

This is a port for connection to RS-485 DATA- signal line.

10

RS-485 DATA+

This is a port for connection to RS-485 DATA+ signal line.

o

SETUP Switch

This switch is used to set the function or property. When this switch is pressed for at least 2 seconds, the
MAIN MENU appears.

ef

(Left/Right) : By pressing this switch left or right, you can move left or right on the menu or change the

displayed value.

cd

(Up/Down) : By pressing this switch up or down, you can move up or down on the menu.

‹

: When you press this switch in the menu, the selected function is confi rmed. To enter a submenu, press

this button.

p

Power Display LED

When the power is normally connected, the red LED lights.

q

Video OUT Port

This is connected to the Video Input Port of the monitor and it outputs the Video signals.

r

GND

This is a grounding port.

s

Power Connection Port

This is connected to the Power cable.

CO
CO

Conn
the A

P

N

1

2

3

4

No

Advertising
This manual is related to the following products: