Sony CMT-CQ1 - Manual (Page 12)

12 GB
Other operations
Notes
• If you use the Daily Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
• Do not operate the system from the time the system
turns on until the play starts (about 15 seconds before
the preset time).
• If the system is on about 15 seconds before the preset
time, the Daily Timer will not be activated.
• You cannot use the optional component connected to
PC/MD/TAPE IN jack as sound sources for the Daily
Timer.
The clock display can be turned off to minimize
the amount of power consumed during standby
(Power Saving Mode).
Press DISPLAY on the remote when the
system is off.
To cancel Power Saving Mode
Press DISPLAY on the remote.
Tip
The timer continues to operate in Power Saving Mode.
Note
You cannot perform the following operations in Power
Saving Mode.
– setting the clock
– changing the AM tuning interval (except for
European and Middle Eastern models)
– turning on the system by pressing the function
buttons
To Do this
Change the setting Start over from step 1.
Check the setting/
activate the timer 1 Press CLOCK/TIMER
SELECT.
2 Press ./> until
“DAILY” appears, then
press ENTER.
Cancel the timer 1 Press CLOCK/TIMER
SELECT.
2 Press ./> until
“OFF” appears, then press
ENTER.
Display
Turning off the display
— Power Saving Mode