Sony SPP-A946 - Manual (Page 30)

30 US Telephone Features
To transfer from the handset to the base
phone
1
Press (INTERCOM).
The call is put on hold, the base
phone rings.
The INTERCOM lamp on the
base phone flashes.
You will be connected
automatically after 3 seconds.
The TALK/BATT LOW lamp on
the handset lights up.
When a person at the base phone
answers, you can talk.
2
Press (SPEAKERPHONE) on the
base phone to talk to the caller
with the base phone.
If no one answers the phone
Press (TALK) on the handset.
Tips
• You can receive an intercom call on the base phone even when the RINGER
switch on the base phone is set to OFF. The base phone will ring at a low
level.
• When a person at the base phone want to answer the intercom call within 3
seconds, press (INTERCOM) on the base phone. If a person at the base phone
press (INTERCOM) after the intercom call is automatically connected, the
intercom call will be disconnected.
(SPEAKERPHONE)
INTERCOM lamp
TALK/BATT
LOW lamp
Transferring a call (continued)
(TALK)
(INTERCOM)