Sony SLV-D360P - Manual (Page 65)

65 S-Video/Component Video hookup
Ad
v
a
n
ce
d Hoo
k
ups
B Use this hookup if your TV has component video input jacks
Connect your TV via the COMPONENT VIDEO OUT jacks using a component
video cord (not supplied) or three video cords (not supplied) of the same kind and
length. You will enjoy accurate color reproduction and high quality images.
See page 62 for audio connections.
If your TV accepts progressive (480p) format signals, you must use this connection
and then set “Progressive” to “On” in the “SCREEN SETUP” menu (page 70). The
PROGRESSIVE indicator lights up in orange when the DVD player outputs
progressive signals.
Notes
• The connection using COMPONENT VIDEO OUT jack is only for the DVD player.
• Consumers should note that not all high definition television sets are fully compatible with
this product and may cause artifacts to be displayed in the picture. In case of 480 progressive
scan picture problems, it is recommended that the user switch the connection to the
“ standard definition ” output. If there are questions regarding our TV set compatibility with
this model 480p DVD player, please contact our customer service center.
l : Signal flow
(DVD only)
Component video cord
(not supplied)
TV
(green)
(red)
(green) (blue) (red)
DVD-VCR
(blue)
PROGRESSIVE indicator