Sharp Notevision XR-50S - Manual (Page 56)

52
STANDBY Mode
When set to “Eco”, power consumption is
reduced in Standby mode.
Selectable
items
Description
Eco The monitor output and RS-232C are
switched off in Standby mode.
Quick Start The monitor output and RS-232C are
activated even if the projector is in
Standby mode.
DLP ®
Link
TM
(XR-55X only)
See the Operation Manual for Stereoscopic
3D Projection provided separately.
DLP
®
Link
TM
Invert
(XR-55X only)
See the Operation Manual for Stereoscopic
3D Projection provided separately.
Returning to the Default
Settings
This function allows you to initialize the
settings you have made in the projector.
The following items or menu cannot be
initialized.
- Resolution
- Language
- Lamp Timer (Life)
- System Lock •
Note
Menu operation n Page 39
Checking the Lamp
Life Status
You can confi rm the cumulative lamp usage
time and the remaining lamp life (percentage).
Lamp usage condition Remaining lamp life
“Life” 100% 5%
Operated exclusively
with “Eco+Quiet”
set to “On” Approx.
4,000 hours Approx.
200 hours
Operated exclusively
with “Eco+Quiet”
set to “Off” Approx.
2,000 hours Approx.
100 hours
It is recommended that the lamp be changed
when the remaining lamp life becomes 5%.
The lamp life may vary depending on the
usage condition. •
•
Note
Adjusting the Projector Function (“PRJ-ADJ1/2” Menu)
(Continued)