Sanyo DS32224 - Manual (Page 9)

REMOTE CONTROL KEYS
➀
Mode Keys—Use these keys to program the
remote control and to select the operating mode
(VCR, TV, or AUX).
To Operate Your... VCR—Press the VCR key;
Television—Press the TV key; Cable Box or
DVD Player—Press the AUX key.
Note: Make sure you hold down the mode
key while entering a code number, see
page 10.
➁
Input Key—Press to select the program source:
TV signal or signal from the DVD Player or
other equipment you have connected to the A/V
jacks.
➂
Number Keys—Two keys must be pressed to
select a channel. Example: Press 0 then 6 to select
channel 6. For cable channels 100 through 125,
press and hold the 1 key until C1– – appears. Then
press the other two numbers.
➃
Caption Key—See page 14.
➄
Menu Key—Use this key with the ▲/▼ and
– /+ keys to navigate and adjust features of the
on-screen menu system (see pages 13 ~ 14).
➅
Channel Scanning (CH
▲/▼
) and Volume
(VOL – /+) Keys—Press to scan through the
channels in memory and to adjust the volume.
➆
Mute Key—Press once to minimize the volume.
Press again to restore.
Note: When using the audio out jacks this key
will not mute the sound.
➇
VCR / DVD Keys—These keys control VCR or
DVD functions for Fast Forward (
), Rewind
( ), Play ( ), Record (REC), Stop ( ■ ), and
Pause.
➈
V-Guide Key—See pages 15 ~ 16.
QuickTips
■ Be sure batteries are
installed correctly.
■ Point the remote
control toward the
equipment you want to
operate. Objects bet-
ween the remote
control and the equip-
ment may cause
misoperation of the
remote control
function.
■ If the remote control
does not work: Press
T V key (see item 1).
■ The remote control
must be programmed
before it will operate
your VCR, DVD
Player, or Cable Box.
See pages 10~12.
■ Cannot select
channel with number
keys. Press “0 ” in
front of numbers 1~9.
Example: Channel 05.
■ Adjusting the volume
level: Flashing Right
arrow indicates
volume is increasing
and flashing Left
arrow indicates
volume is decreasing.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
RECALL
DISPLAY MUTE
PLAY
PAUSE
V-GUIDE
REC STOP
MENU
CAPTION SLEEP
RESET INPUT
CH
VOL VOL
POWER
VCR TV AUX
1 2 3
4 5 6
7 8 9
0
1 2 3
4 5 6
7 8 9
0
➀
➁
➂
➃
▲
▲
(Continued on page 10.)
➠
Point towards TV
or Equipment
➇
➈
➅
➆
➄
Remote Control Operation
9