Receiver external antenna, Monitor or tv, Receiver power adaptor – Swann MicroCam II User Manual

Page 4: Camera power adaptor, 9v battery adaptor

Advertising
background image

Receiver

External antenna

Audio / Video Out

To Audio and
Video IN

MicroCam III

Camera Power Adaptor

Monitor or TV

9v Battery Adaptor

DC Socket

Channel
Selector
Button

MicroCam III Stand

Loop / Normal Switch

Active
Channel
Leds

!

DUE TO GOVERNMENT PRIVACY REGULATIONS RELATING TO THE USE OF
COVERT LISTENING DEVICES IN SOME COUNTRIES, THE MICROCAM III
TRANSMITTER SENDS VIDEO ONLY - IT DOES NOT HAVE AUDIO
TRANSMISSION CAPABILITY WHERE THESE RESTRICTIONS ARE IN PLACE.

!

Please test all devices before final installation because transmission quality can often be
improved by moving the components slightly.

!

Turn off the transmitter and receiver if the system is not in use.

!

Do not touch the antennas when the system is switched on.

!

Do not place the receiver behind a monitor or TV.

!

To avoid the risk of damage to MicroCam III, use only the supplied power adaptors.

!

Don’t place above or near a heat source which may cause the equipment to overheat.

!

Microwave ovens can cause interference and diminish the quality of the signal if the

MicroCam III or Receiver are located close by.

!

Beware of humid locations. Water droplets or spray may damage the units. If condensation

does occur, do not use until the equipment has dried out.

!

Never paint or attach metallic labels or stickers of any kind.

!

Do not use two MicroCam III systems operating at the same time in the same area. This will

result in picture interference.

!

Do not cut the DC power cable of the MicroCam III to fit with another power source. This

may result in damage to the MicroCam III & any unauthorised modifications will void your
warranty.

Best Results are achieved where there is a clear “line of sight” between the MicroCam III
transmitter and Receiver.

!

Try to avoid obstacles such as trees, walls, cars, trucks and buildings when maximum range is
required.

!

Interference from certain electronic equipment or the moving human body can also affect the
range obtainable.

!

S

E

L

C

H

2

C

H

4

C

H

1

C

H

3

Receiver
Power Adaptor

Receiver Features

Important Information about this product

Camera Features

4

5

IMPORTANT: Due to the power consumption requirements of this product, we highly
recommend the use of a 9 volt battery only for short term portable use.

Advertising