Samsung SCC-C7435(P) - Manual (Page 45)


ENG

❚ Video set
IRIS
There is a function to automatically adjust IRIS to the incoming light level. Owing to this
function, you may set up the brightness level yourself. The ALC(Auto Light Control) menu
allows you for video output level setup. The WDR(Wide Dynamic Range) menu allows you for
setting up the level of WDR.
Note
SCC-C74��(P) does not support for WDR function.
ALC
Choose the ALC of the IRIS item and press the ENTER and set the submenu to the Video
Output level and BLC will be shown. The Video Output Level can be set in the level item using
the Left/Right keys.
BLC (Submenu of the ALC menu)
If you use a general camera to photograph a subject under backlight or bright illumination, the
subject will be shown dark on the monitor due to the backlight. BLC(Back Light Compensation)
is used to prevent such a backlight problem to secure distinct images under bright illumination.
Using the Left, Right keys, you can set up [BOTTOM…], [TOP…], [LEFT…], [RIGHT…],
[CENTER…] 5 preset areas and the [USER…] function that can directly set the areas. For
example, for the items in the BLC menu, you can confirm the preset BOTTOM area by pressing
the ENTER key in the [BOTTOM…] status.
(VIDEO SET)
IRIS ALC...
SHUTTER OFF
AGC HIGH
WHITE BAL ATW2
FOCUS MODE ONEAF
SPECIAL ...
EXIT QUIT
(ALC)
BLC OFF
LEVEL ( 0) ----I----
RET
SCC-C7433_7435-Eng.indd44 2008-05-20오전10:49:47