Sony Grand Wega KF-50SX200U - Manual (Page 20)

20
Menu System
Menu System
With this feature you can:
a) Individually attenuate the strength of a channel signal in case there is a strong local aerial signal (characteristically a striped
picture).
b) Individually adjust the volume level of each channel.
c) Normally the automatic fine tuning (AFT) will operating, however you can manually fine-tune the TV to obtain better
reception if the picture is distorted.
d) Preset the AV output for the programme positions of channels with scrambled signals (eg from a pay TV decoder). In this way
a connected VCR records the unscrambled signal.
Using the "Further Programme Preset" function
1
Press the button on the remote control to display the menu
on the screen.
2
Push the joystick to select the symbol, then push to enter the
Set Up menu.
3
Push the joystick or to select Manual Set Up then push to
to enter.
4
Push the joystick or to select Further Programme Preset,
then push to
to enter.
5
Push the joystick or to select the relevant programme number,
then push repeatedly to select:
a) ATT (RF attenuator)
b) VOL (Volume Offset)
c) AFT (Automatic Fine Tuning) or
d) DECODER
6
a) ATT
Push the joystick to select On, then press the button.
Repeat steps 5 and 6 a) to attenuate other channels.
b) VOL
Push the joystick or to adjust the volume level of the channel
over a range of -7 to +7, then press the
button. Repeat steps 5
and 6b) to adjust the volume level of the other channels.
c) AFT
Push the joystick or to fine tune the channel frequency over
a range of -15 to +15, then press the
button. Repeat steps 5 and
6c) if you wish to fine tune other channels.
d) DECODER
Push the joystick or to select AV1 (for a decoder connected
to the Scart
:1/ 1) or AV3 (for a decoder connected to the
Scart :3/q 3 (SMARTLINK)), then press the button.
Repeat steps 5 and 6d) to select the AV1 or AV3 output for other
programme positions.
The picture from the decoder connected to the Scart connector
:1/ 1
or :3/q 3 (SMARTLINK) on the back of the
set will appear on the selected programme number.
7
Press the button to exit and return to the normal TV screen.
The TV set is now ready for use.
Picture Adjustment
Select: Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
AI
Noise Reduction
Colour Tone Personal
On
Off
Normal
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select: Start Auto Tuning
Start
- - - - - - -
Enter:
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
- - - - - - -
Manual Set Up
Select: Enter:
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
Personal ID
Demo - - - - - - -
Further Programme Preset
Select: Enter:
PROG AFT VOL ATT DECODER
On
On
On Off
Off
Off 0
0
0 Off
Off
Off 1
2
3
4
5
6
7
8
9
10
11
PROG AFT VOL ATT DECODER
1 Off
On
PROG AFT VOL ATT DECODER
1 On -5 2
PROG AFT VOL ATT DECODER
1 On -5 2 Off
AV1
AV3
PROG AFT VOL ATT DECODER
1 On - 5
01GBKF50/42SX200U.fm Page 20 Tuesday, January 7, 2003 10:54 AM