Savin Copier SDC326 - Manual (Page 61)

Basic Procedure
51
2
Auto Start
If you press the
{Start} key during the warm-up period, the {Start} key will blink
and the machine will start copying after the warm-up period.
A
Set your copy settings during the warm-up period.
B
Press the
{{{{Start}}}} key.
Note
❒ To cancel Auto Start, press the {Clear/Stop} key.
Program
You can store up to five frequently used copy job settings in machine memory
and recall them for future use.
Note
❒ If you want to change the stored programs, store another program again.
Storing your settings
A
Set the copy settings you want to put into memory.
B
Press the
{{{{Program}}}} key.
Tlcs060n.eps
Zcms023n.eps