Cb d, When playing “wide screen” images, If you are connecting to a vcr – Sony RDR-HXD910 User Manual

Page 17: Hook up s and se tti n gs, Signal flow

Advertising
background image

17

H

ook

up
s and

Se
tti

n

gs

When playing “wide screen” images

Some recorded images may not fit your TV
screen. To change the picture size, see page 94.

If you are connecting to a VCR

Connect your VCR to the LINE 3 jack on the
recorder (page 26).

b

Notes

• Do not connect more than one type of video cord

between the recorder and your TV at the same time.

• You cannot use the PROGRESSIVE button with the

connections B and C.

• When you connect the recorder to your TV via the

SCART jacks, the TV’s input source is set to the
recorder automatically when you start playback. If
necessary, press t TV/VIDEO to return the input to
the TV.

• For correct SMARTLINK connection, you will need a

SCART cord that has the full 21 pins. Refer to your
TV’s instruction manual as well for this connection.

• If you connect this recorder to a TV with

SMARTLINK, set “Line1 Output” to “Video” in “Easy
Setup.”

• You cannot connect the HDMI OUT jack (connection

E

) to DVI jacks that are not HDCP compliant (e.g.,

DVI jacks on PC displays).

* This DVD recorder is based on version 1.1 of High-

Definition Multimedia Interface Specifications.

This DVD recorder incorporates High-Definition
Multimedia Interface (HDMI™) technology.

HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.

AERIAL

~

AC IN

IN

OUT

COMPONENT

VIDEO OUT

P

B

/

C

B

Y

P

R

/

C

R

LINE

2

OUT

LINE

4

IN

LINE 1 - TV

VIDEO

-AUDIO

S VIDEO

R

L

VIDEO

-AUDIO

S VIDEO

R

L

DIGITAL OUT

HDMI OUT

COAXIAL

OPTICAL

PCM/DTS/MPEG/DOLBY DIGITAL

LINE 3

VIDEO

AUDIO

INPUT

L

R

INPUT

S VIDEO

P

R

/C

R

P

B

/C

B

Y

COMPONENT

VIDEO IN

IN

C

B

D

A

E

Audio/video cord
(supplied)

Component video
cord (not supplied)

(yellow)

TV, projector, or AV
amplifier (receiver)

TV, projector, or AV
amplifier (receiver)

(green)

S-video cord
(not supplied)

TV, projector, or AV
amplifier (receiver)

(red)

(blue)

(green)

(blue)

(red)

: Signal flow

to COMPONENT
VIDEO OUT

to LINE 2 OUT (VIDEO)

to LINE 2 OUT (S VIDEO)

SCART cord
(not supplied)

to i LINE 1 – TV

DVD recorder

TV

HDMI cord
(not supplied)

to HDMI OUT
(RDR-HXD910
only)

TV, projector, or AV
amplifier (receiver)

,continued

Advertising
This manual is related to the following products: