Getting started – Samsung 440 User Manual
Page 8
8
Getting Started
English
Connecting to an Antenna or Cable Connection
When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and an antenna or cable connection.
✎
The PDP device may interfere with an amateur radio or AM radio.
Plug & Play (Initial Setup)
When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic settings. To turn on
the TV, Press the
POWER
P button. Plug & Play is available only when the Input source is set to TV.
✎
Plug & Play is available only when the Source is set to TV.
✎
To return to the previous step, in the Plug & Play sequence, press the red button on your remote.
1
Selecting the OSD
Language
Press the
◄ or ► button, and then press the ▲ or ▼ button to
select a language. Press
ENTER
E when done.
P
POWER
2
Selecting Store Demo
or Home Use
Press the
◄ or ► button, then press the
ENTER
E button.
y
Select the Home Use mode. Store Demo mode is for retail
environments.
y
To return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you
see the volume OSD, press and hold
MENU
for 5 sec.
3
Selecting an antenna
Press the
▲ or ▼ button, then press the
ENTER
E button. Select Air, Cable or Auto.
4
Selecting and
memorizing channels
The channel search will start automatically. This can take up to 30 minutes.
For more information, refer to Channel
→ Auto Program in the e-Manual.
✎
Press the
ENTER
E button at any time to interrupt the memorization process.
5
Setting the
Clock Mode
Set the Clock Mode automatically or manually.
y
Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.
y
Manual: Allows you to manually set the current date and time (p. 18).
6
View the
HD Connection Guide.
The connection method for the best HD screen quality is displayed.
7
Enjoy your TV.
Press the
ENTER
E button.
If You Want to Reset This Feature...
O
MENU
m → Setup → Plug & Play →
ENTER
E
✎
NOTE
y
To change the TV’s setting from Store Demo to Home Use when not in Plug & Play, press the volume button on the TV.
When you see the volume in the OSD, press and hold
MENU
for 5 sec.
ANT OUT
VHF/UHF Antenna
or
Cable
Power Input
Antenna Cable (Not Supplied)
[PD450-ZA]BN68-03325A-00Eng.indb 8
2011-02-01 오후 3:07:30