Siemens ADSL 50 - Manual (Page 38)

SANTIS ADSL 50/500 User Manual
Save Configuration
This page allows you to save all current configuration settings to non-volatile memory. Please wait for several
seconds to complete this process.
Upgrade Software
The ADSL Router supports the upgrading by using HTTP. To transfer the firmware file, follow the steps below:
1. Download and unzip the new software file from vendor.
2. In the File Name of Firmware field, click Browse to locate the upgrade file.
3. Click the Upgrade button.
After upgrading, the original configuration will still exist and not reset to the factory defaults.
Reset Router
This page allows you to restart your router for invoking new configuration. After restarting, you should wait for
several seconds to let the system come up. When restarting the system, your brower session will be disconnected.
Please wait until the device finish restarting.
Note:
If Reset to factory default settings is checked, the settings will return to factory defaults,
including the Username and Password.
38