Setting the audio – Samsung HE10T User Manual

Page 39

Advertising

●

SYSTEM SETUP

SETTING THE AUDIO

OSD(On-Screen Display) language is set to English by default.

In Stop mode, press the MENU button.
Press the Cursor ▼ button to move to Setup and then press the

ENTER or ► button.

Select Audio Setup and then press the ENTER or ► button.
Press the Cursor ▲,▼ button to select the required item.
Press the Cursor ▲,▼ button to select the desired option and then

press the ENTER button.

The option is selected and the screen returns to Audio Setup Menu.

Press the RETURN button to return to the previous level.

Press the EXIT button to exit the setup screen.

Digital Out :

PCM: Converts to PCM (2CH) audio. Select PCM when using

the Analog Audio Outputs.

Bitstream: Converts to Dolby Digital Bitstream (5.1CH).Select

Bitstream when using the Digital Audio Output

Dynamic Compression :

On: To select dynamic compression.

Off: To select the standard range.

PCM Down Sampling:

On: Select this when the amplifi er connected to the player is not 96KHz compatible. In this
case, the 96KHz signals will be down converted to 48KHZ.

Off: Select this when the amplifier connected to the player is 96KHz compatible. In this case, all

signals will be output with out any changes.

1.
2.

3.
4.
5.

•

Digital Out :

PCM

Dynamic Compression : On

PCM Down Sampling : On

AUDIO SETUP

Language Setup

Audio Setup

Display Setup

Parental Setup :

DivX(R) Registration

02107A-RTSHE10-0521.indd 39

6/2/08 5:08:02 PM

Advertising