Sharp R-1505L - Manual (Page 12)

12
This is a 12 hour clock. If you attempt to enter an incor-
rect clock time,
ERROR will appear in the display. Touch
the STOP/CLEAR pad and re-enter the time.
• If the electrical power supply to your microwave oven
should be interrupted, the display will intermittently
show
88:88 after the power is reinstated. If this
occurs during cooking, the program will be erased.
The time of day will also be erased. Simply touch
STOP/CLEAR pad and reset the clock for the correct
time of day.
• Before operating your new microwave oven make sure you read and understand this operation manual completely.
• Before the oven can be used, follow these procedures:
1. Plug in the oven. Close the door. The oven display will then begin flashing .
2. Touch the
STOP/CLEAR pad. will appear.
3. Set clock.
B E F O R E O P E R A T I N G
88:88
:
TO SET THE CLOCK
• Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.).
P R O C E D U R E D I S P L A Y
1
2
Touch CLOCK pad.
Enter the correct time
of day by touching the
numbers in sequence.
1 2 3 0
TIMER
CLOCK
12:30
: 0
Touch the STOP/CLEAR pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
STOP/CLEAR
3
Touch CLOCK pad again.
TIMER
CLOCK
12:30
1.R-1505_444.indd 12 12/21/05 1:30:51 PM