Sharp MODEL R-2197 - Manual (Page 8)

7
A30019, SCA R2197 O/M
NO.
Step Procedure Display
1 Press the SET pad twice within 2 seconds.
* Suppose you want to set 4 minutes at 60% at the 1st sequence and 2 minutes at 30% at the 2nd sequence for 1 serving
in the memory 1.
Pad Order
TO PROGRAMME TIME AND POWER LEVEL INTO A MEMORY
X 2
2
4
5
6
7
8
9
10
11
Enter desired cooking time for the 1st
sequence. (4 minutes)
Press the SELECT POWER pad.
Enter desired power level for the 1st se-
quence. (60%)
Press the SELECT TIME pad.
Enter desired cooking time for the 2nd
sequence. (2 minutes)
Press the SELECT POWER pad.
Enter desired power level for the 2nd
sequence. (30%)
Press the SET pad twice to complete
the setting.
3 Press the SELECT TIME pad.
Note: 1. If the cooking time is over the max. time, the display will show "EE9". See page 14.
2. If your programmed time is over max. time at Double Quantity, you cannot use Double
Quantity for the memory. You can cook only 1 serving.
3. It is not necessary to press the SELECT POWER pad for 100%.
4. At step 1, any audible signals will not sound when the SET pad is pressed first and then an
audible signal will sound when the SET pad is pressed second.
X 2
Press the NUMBER pad .
NO.
NO. will flash on and off.
Within 2 sec.
SCA R2197 O/M P01-10 03.10.27, 4:19 PM 7