Charging and installing the battery pack – Sony DCR-VX9000 User Manual

Page 8

Advertising
background image

8

Charging and installing the battery pack

Battery life

Battery

Continuous

Typical recording

pack

recording time*

time**

NP-F730

80 (75)

50 (45)

NP-F750

95 (85)

60 (55)

NP-F930

120 (110)

75 (70)

NP-F950

145 (130)

90 (80)

Numbers in parentheses indicate the time when you use a normally charged battery.
Battery life will be shorter if you use the digital camcorder in a cold environment.
* Approximate continuous recording time indoors.
** Approximate minutes when recording while you repeat recording start/stop,

zooming and turning the power on/off. The actual battery life may be shorter.

To remove the battery pack

Slide the battery pack in the direction of the arrow.

Notes on charging the battery pack
• The CHARGE lamp will remain lit for a while even if the battery pack is removed and

the AC power adaptor is unplugged after charging the battery pack. This is normal.

• If the CHARGE lamp does not light, disconnect the AC power adaptor. After about

one minute, reconnect the AC power adaptor again.

• When operating the digital camcorder using the AC power adapter, you cannot

charge the battery pack.

• When a fully charged battery pack is installed, the CHARGE lamp will light once,

then go out.

Advertising