Sanyo AVM-3651G - Manual (Page 5)

5
QuickTips
■ Make sure all cable
connectors are fully
seated on jacks.
See pages 12 and 13
before connecting
external audio/video
equipment.
■ Cables are not
supplied for connect-
ing your external
equipment.
■ A solid Blue screen
with the word Video1
or Video2 displayed
means that the Video
mode is selected, but
no signal is being
detected at the
Video jack. Check
connection, and
turn on external
equipment.
■ Be sure batteries are
installed correctly.
■ Point the remote
control toward the
equipment you want
to operate. Objects
between the remote
control and the
equipment may cause
misoperation of the
remote control
function.
REAR PANEL
Cable / Antenna Input
Terminal (75 ohms)
Audio / Video Input Jacks (AV1)
Connect external video equipment
here (see page 13).
Audio Output Jacks (Fixed/Variable)
Connect external audio
equipment here (see page 12).
AUDIO VIDEO INPUT AUDIO VIDEO INPUT
VIDEO VIDEO
AV2 AV2 AV1 AV1
S-VIDEO S-VIDEO
INPUT INPUT
AUDIO AUDIO
OUTPUT OUTPUT
(MON0)
(MON0)
L L
AUDIO AUDIO
R R
L
R AV 2 AV 2
AV 1 AV 1
UHF/VHF/CATV
75Ω
Audio / Video Input Jacks (AV2)
Connect other external video equip-
ment here (see page 13).
S-Video (Super-Video) AV1 Terminal
To enhance video detail use the S-Video
AV1 jack instead of the AV1 Video jack,
if available on your external video equip-
ment. (S-Video AV1 connection will
override a Video 1 connection.)
S-Video (Super-Video) AV2 Terminal
To enhance video detail use the S-Video
AV2 jack instead of the AV2 Video jack,
if available on your external video equip-
ment. (S-Video AV2 connection will
override a Video 2 connection.)
INSTALLING BATTERIES (2 AA not included)
1. Remove the battery cover by pressing the tab and tilting
the cover upward. Insert batteries. Make sure you match
/ signs on the batteries with marks inside the
remote control.
2. Replace battery cover. The remote control is ready!
Notes:
– Do not mix old batteries with new ones or mix
different types of batteries together.
– Remove the batteries if the remote control will not be
used for a month or more. Weak batteries may leak and
cause damage.
+
MULTIMEDIA REMOTE CONTROL
Operates your TV, VCR, DVD, and Cable converter box. To familiarize yourself with this
remote control, see page 6. To program the remote control, see pages 7~8.
IMPORTANT NOTE: Spent or discharged batteries must be recycled or
disposed of properly in compliance with all applicable laws. For detailed
information, contact your local County Solid Waste Authority.