Samsung SPINPOINT MP2 HM081HJ - Manual

Mobile SATA
Spinpoint MP2
250GB 200GB 160GB 120GB 100GB 80GB
Non-FFS HM250JJ HM200JJ HM160JJ HM120HJ HM100HJ HM080HJ
FFS HM251JJ HM201JJ HM161JJ HM121HJ HM101HJ HM081HJ
FEATURES
• Max. 125GB formatted capacity per disk • ATA Security Mode Feature Set
• SATA Native Command Queuing Feature • ATA S.M.A.R.T. Feature Set
• TuMR/PMR head with FOD technology • SilentSeek™
• Serial ATA 3.0Gbps Interface Support • NoiseGuard™
• Load/Unload Head Technology • Free Fall Sensor(optional)
Capacity 1 80GB/100GB/120GB/160GB/200GB/250GB Temperature
Interface SATA 3.0Gbps Operating 5 ~ 55 ℃
Buffer DRAM Size
2 16 MB Non-operating -40 ~ 70 ℃
Byte per Sector 512 Humidity (non-condensing)
Rotational Speed 7,200 RPM Operating 5 ~ 90 %
Non-operating 5 ~ 95 %
Linear Shock (1/2 sine pulse)
Average Seek time (typical) 11ms Operating(2ms) 325 G
Average Latency 4.17 ms Non-operating(1ms) 900 G
Data Transfer Rate Vibration
Media to/from Buffer (Max.) 1.1 Gbits/s Operating(Random,10~500Hz) 0.7Grms
Buffer to/from Host (Max.) 300MB/s Altitude (relative to sea level)
Drive Ready Time (typical)
3 4 sec Operating -300 to 3000 m
Non-operating -400 to 15000 m
Non-recoverable Read Error 1 sector in 10
14
bits
Controlled Ramp Load/Unload 600,000
Height (Max.) 9.5 mm
Width 69.85 mm
Idle 80,100,120GB : 2.4Bel Length 100 mm
160,200,250GB : 2.6Bel Weight (avg.) 115 g
Performance Seek 80,100,120GB : 2.6Bel
160,200,250GB : 2.8Bel * Note : Design and specifications are subject to change without prior notice.
1.1MB = 1,000,000 Bytes, 1GB = 1,000,000,000 Bytes
Accessible capacity may vary as some OS uses binary numbering system
Voltage +5V±5% for reported capacity
Spin-up Current (Max.) 1000 mA 2. A small portion of the 16MB buffer memory is reserved for firmware use.
Seek (avg.) 4 2.65 W 3. Power-On to Drive Ready
Read/Write (avg.) 2.55 W 4. 30% duty cycle, random seek
Low Power Idle (avg.) 0.8 W ※. Unless otherwise specified, specifications are for 250GB configuration
Standby (avg.l) 0.25 W
Sleep (avg.) 0.20 W
2.5" HDD product specification Rev 0.2
Match with product Manual Rev 01
ENVIRONMENTAL SPECIFICATIONS
PERFORMANCE SPECIFICATIONS
RELIABILITY SPECIFICATIONS
PHYSICAL DIMENSION
POWER REQUIREMENTS
ACOUSTICS
Capacity
DRIVE CONFIGURATION
Model