Setting the self timer – Samsung 12172009 User Manual

Page 83

Advertising
background image

76 Camera

Average: Automatically adjusts the lighting.

Spot: Adjusts the lighting to focus on a particular spot of the

picture.

(4) Settings: Allows you to change the following camera settings:

Resolution: Your full-color digital camera can take pictures in three
modes. Each mode allows you to increase the zoom multiple levels,
depending on the resolution setting. This allows you to get a closer
view of the subject or scenery being photographed. The available
sizes are:

1.3M (1280*960): This is the default resolution setting for this

camera. In 1.3M mode, zoom is not supported. This is the
highest resolution.

High (640*480): The high setting allows a high level of image

detail. Images taken at the high setting require more memory to
save than the other modes.

Med (320*240): The medium setting allows you to take good

quality images without using too much memory.

Low (176*234): The low setting allows you to take average

quality images. You can save the most images in memory using
this setting.

Tip: While in Camera mode, the zoom feature is available using the navigation key.

Quality: The quality allows you to select between Super Fine, Fine,
and Normal. These settings reflect the image quality settings for the
pictures.
Shutter Sound: The shutter sound allows you to select between
three shutter sounds or “Say Cheese”. The shutter sound is heard
when you take a picture.
Status Bar: The Status Bar can be turned On or Off.

(5) Launch: Allows you to review pictures currently stored in your
camera.

Setting the Self Timer

To activate the Self Timer and get yourself in on the picture:

1. With the phone in camera mode, press the right softkey

for

Options.

r330 BMC Guide.book Page 76 Thursday, December 17, 2009 11:15 AM

Advertising