Siemens Gigaset C34 - Manual (Page 9)

8
Making calls
Gigaset C34 / ISR eng / A31008-M1607-B501-1-7619 / start_guide_time.fm / 22.3.05
Step-by-step instructions
This manual uses symbols to guide you
through the setting of your phone. The
example below shows you how to read the
symbols and gives you explanations in the
text boxes.
Making calls
Making an external call
External calls are calls using the public tel-
ephone network.
~ c
Enter the number and press
the talk key.
Or:
c ~
Press the talk key c long and
then enter the number.
You can cancel the dialling operation with
the end call key a.
End call
a Press the end call key.
Answering a call
The handset indicates an incoming call in
three ways: it rings, there is a display on
the screen and the handsfree key d
flashes.
You can take the call in the following
ways:
¤
Press the talk key c.
¤
Press the handsfree key d.
If the handset is in the charging cradle and
the Auto Answer function is activated
(page 13), the handset will take a call
automatically when you lift it out of the
cradle.
§Menu§
¢
Audio Settings
¢
Ringer Melody
¤
With the handset in idle status, press
on the right of the control key to open
the main menu.
¤
With the control key, select q Audio
Settings and press on the right of the
control key to confirm your selection
with §OK§ .
¤
With the control key, select q Ringer
Melody and press on the right of the
control key to confirm your selection
with §OK§ .
Select External Calls / Internal
Calls and press §OK§ .
¤
Press the bottom of the control key
repeatedly until External Calls or Internal
Calls is selected.
¤
Press OK§ (control key right) to confirm
your selection.
q Select melody ( ‰ = on) and
press §OK§ .
¤
Press the top or bottom of the control
key to select a melody.
¤
Press §OK§ (control key right) to confirm
your selection.
The selected melody is indicated by a ‰.
a Press and hold (idle status).
¤
Press the end call key and hold until the
handset returns to idle status.
Note:
– Dialling with the directory (page 9) or last
number redial list (page 11) saves repeated
keying of phone numbers.
– You can assign a number from the directory
to a key for speed dialling (page 10).