Sony DVP-FX96 - Manual (Page 20)

master page=left
DVP-FX96
4-266-600-22(1)
G:\Project_2010_Aug\Feiyu_20101111_FX96\6_Target\4266600111\4266600111DV
PFX96U8\01US\01US09ADD-CEK.fm
20
, The Playlist of the created disc is
automatically played. To play original
titles, press x twice, and press TOP
MENU to set “Original.”
“ ” appears and the player does not
function according to the button.
, Depending on the disc, you may not be
able to perform certain operations. Refer
to the operating instructions supplied
with the disc.
“Copyright Lock” appears and the
screen turns blue when playing a DVD
(VR mode) disc.
, When images that contain copy
protection signals are played, a blue
screen and the message may appear
instead of the images (page 23).
C/c does not work on menu display.
, Depending on the disc, you may not be
able to use C/c on the player for the disc
menu. In this case, use C/c on the
remote.
The remote does not function.
, Batteries in the remote are weak.
, The remote is not pointed at the remote
sensor on the player.
, Direct sunlight or strong illumination is
striking the remote sensor.
The MP3, JPEG, or video file cannot be
played (page 24).
, The file format does not conform.
, The extension does not conform.
, The file is damaged.
, The file size is too large.
, When the selected file is not supported,
“Data Error” appears and the file will not
be played.
, Because of the compression technology
used for video files, playback may take
time to start.
The player does not operate properly or
the power does not turn off.
, When static electricity, etc., causes the
player to operate abnormally, set the
POWER switch to “OFF” and disconnect
the adaptor and leave for 30 seconds.
Hookup
There is no picture or sound on the
connected equipment (TV or monitor).
, Re-connect the connecting cable
securely (page 10).
, The connecting cable is damaged.
, Check the setting of a connected TV or
amplifier.
There is no picture or sound from a
connected equipment (video player or
camcorder).
, Press INPUT SELECT repeatedly to
select “Line In” (page 10).
USB
The player does not recognize a USB
device connected to the player.
, Re-connect the USB device securely
(page 14).
, The USB device is damaged.
, Press INPUT SELECT repeatedly to
select “USB” (page 14).
01US01COV.book Page 20 Wednesday, May 25, 2011 9:54 AM