Sharp AL-1551 - Manual (Page 27)

25
3
Making copies
BYPASS FEED
To close the bypass tray, perform
step1 and then step 2 in the
illustration and push the round
projections at the right of the tray
until they click.
3
Set the paper guides to the copy paper width. Insert the copy paper (print face down)
all the way into the bypass tray.
● Paper must be fed narrow side into the feed slot.
● Transparency film, labels, and other special purpose papers must be fed
individually.
● When copying onto transparency film, remove each copy promptly. Do not let
copies stack up.
● When loading an envelopes, make sure that it is straight and flat.
Print face
4
Press the tray select ( ) key to select the bypass tray. Set the number of copies if
using standard copy paper. Press the print ( ) key.