Sony Card Remote Commander RM-X302 - Manual

Card remote commander RM-X302
A SOURCE button
To power on; change the source (Radio/CD/
MD*
1 /Bluetooth AUDIO/AUX).
B Joystick/LIST button
Rotate to: Adjust the volume.
Push up/down/left/right to: Select a menu item.
Press to: Apply a setting.
CD/MD*
1 :
Push up/down to* 2 :
– Skip groups* 3 /albums* 4 (push).
– Skip groups* 3 /albums* 4 continuously (push
and hold).
Push left/right to:
– Skip tracks (push).
– Skip tracks continuously (push, then push
again within about 2 seconds and hold).
– Reverse/fast-forward a track (push and hold).
Radio:
Push up/down to:
– Receive stored station.
Push left/right to:
– Tune in stations automatically (push).
– Find a station manually (push and hold).
Press to:
– Display the list.
C MODE button
To select the radio band (FM/MW/LW)/select
the unit*
5 .
D MENU button
To enter menu.
E Display window
F OPEN button
G OFF button
To power off; stop the source.
H Receptor for the card remote
commander
I AF/TA button
AF (Alternative Frequencies)/TA (Traffic
Announcement), TP (Traffic Programme):
Each time you press (AF/TA), the item changes
as follows:
AF on t TA on t AF/TA on t
AF/TA off
J Number buttons
CD/MD* 1 :
(1): REP
(2): SHUF
(5): BBE MP*
6
To activate the BBE MP function, set
“BBE MP on.” To cancel, set “BBE MP
off.”
(6): PAUSE* 6
To pause playback. To cancel, press again.
Radio:
To receive stored stations (press); store stations
(press and hold).
K DSPL (display)/PTY (Programme Type)
button
To change display items; select PTY in RDS
(press (PTY), then push the joystick up/down to
search for the station, and press).
L Disc slot
To insert the disc (label side up). Playback starts
automatically.
You can play CD-DA (also containing CD
TEXT), CD-R/CD-RW (MP3/WMA files also
containing Multi Session) and ATRAC CD
(ATRAC3 and ATRAC3plus format).
M RESET button
Detach the front panel and press the RESET
button with a pointed object, such as a ballpoint
pen.
Notes
• Before operating the unit for the first time, or after
replacing the car battery or changing the
connections, you must reset the unit.
• Pressing the RESET button will erase the clock
setting and some stored contents.
N Z (eject) button
To eject the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
qg ENTER button
To apply a setting.
qh LIST button
To list up.
qj Number buttons
Buttons 1 to 6 share the same functions as the
number buttons on the unit.
qk M (+)/m (–) buttons
The same as pushing the joystick up/down.
ql < (.)/, (>) buttons
The same as pushing the joystick left/right.
w; SCRL (scroll) button
To scroll display item.
wa SOUND button
To select sound items.
ws ATT (attenuate) button
To attenuate the sound. To cancel, press again.
wd VOL (volume) +/– buttons
To adjust volume.
*1 When an MD changer is connected.
*2 If the changer is connected, the operation is different.
*3 When an ATRAC CD is played.
*4 When an MP3/WMA is played.
*5 When a CD/MD changer is connected.
*6 When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
A SOURCE button
To power on; change the source (Radio/CD/
MD*
1 /Bluetooth AUDIO/AUX).
B Joystick
Rotate to: Adjust the volume.
Push up/down/left/right to: Select a menu item.
Press to: Apply a setting.
Bluetooth audio device*
2 :
Push left/right to:
– Skip tracks (push).
– Reverse/fast-forward a track (push and hold).
C Bluetooth button
To access the Bluetooth functions; receive a call.
D MENU button
To enter menu; receive a call.
E Display window
F OFF button
To power off; stop the source; end or reject a
call.
G CALL button
To access the telephone functions; receive a call.
H Receptor for the card remote
commander
Card remote commander RM-X302
I Number buttons
To call stored dials.
Bluetooth audio device*
2 :
(6): PAUSE
To pause playback.
J Bluetooth indicator
Lights up when the Bluetooth signal is input/
output. Goes off when the Bluetooth signal is
off.
K Microphone
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
qs ENTER button
To apply a setting.
qd Number buttons
To input numbers (phone number, passcode,
etc.).
Buttons 1 to 6 share the same functions as the
number buttons on the unit.
qf button
qg M (+)/m (–) buttons
The same as pushing the joystick up/down.
qh < (.)/, (>) buttons
The same as pushing the joystick left/right.
qj VOL (volume) +/– buttons
To adjust volume.
qk button
*1 When an MD changer is connected.
*2 When a Bluetooth audio device (supports AVRCP of
Bluetooth technology) is connected. Depending on the
device, certain operations may not be available.
Location of controls and basic operations
Audio function
MEX-BT5000
1
7 9 qa 0 8
3 5 6 2 4
RESET
qf qd qs
Main unit
Front panel removed
Warning if your car’s ignition has no
ACC position
After turning the ignition off, be sure to press
and hold
(OFF) on the unit until the display
disappears.
Otherwise, the display does not turn off and
this causes battery drain.
7
ql
qk
w;
ws
wd
wa
1
qg
3
4
qh
qa
qj
Bluetooth function
For details on the Bluetooth function, see the
supplied “Enjoy using Bluetooth wireless
technology” or “Operating Instructions.”
MEX-BT5000
1
6 0 9 7 8
3 5 2 4
qa
Main unit
Front panel removed
7 3
6
qh
qg
qj
qk
1
qs
4
qd
qf
MEX-BT5000
© 2006 Sony Corporation
Detaching the front panel/Setting the clock/
Storing stations automatically/Display items/
Repeat and shuffle play/Adjusting menu items/
Customizing the equalizer curve
B