Sound Performance Lab 2053 - Manual (Page 5)

5 24/96 AD-DA Converter 2053
External synchronization: For synchronization with
external sources, AES-data or Word-Clock signals can
be used as sync sources. Alternatively the A/D
converter can be synchronized to the data adjacent to
the D/A converter. For internal/external synchroniza-
tion please refer to the chapter "Operation", from
page 11.
The SPL converter module 2053 is exclusively offered
as an option for certain SPL units. We especially advise
electronically inexperienced users to contact an
expert in case of queries.
• In order to avoid static loads, please deactivate the
GND-Lift switch on the back of the unit that is to be
upgraded and touch its case.
• Now pull the power cord out of the socket on the
back of the unit operating the converter module.
Please also remove all other cable connections.
• Treat the converter carefully. Please make sure that
you only touch the front panel or the sides of the cir-
cuit board in order to avoid contact with parts on the
circuit board. Never force any parts when connecting
unit and converter module.
Product Description
Mounting General Information