Studer Innotec RCC-03 - Manual (Page 45)

RCC
45
UPDATES
The RCC remote control program as well as the code in the inverters/chargers of the Xtender series
can be updated in order to integrate new features.
For the RCC remote control it is also possible to implement new display languages (up to a
maximum of 4 on each RCC remote control). You may obtain information about the availability of
updates or additional languages from your installer or consult the website: www.studer-
innotec.com .
U
PDATING PROCESS
Before introducing the SD card to carry out the updating, do switch off all Xtenders
(off).
To carry out an update, enter the SD card containing the correct files in the RCC remote control
slot intended for this.
The system checks the compatibility of the hardware with the software present on the SD card and
if it proves to be compatible the update is carried out automatically.
The SD card must not be removed before the end of the updating process. Yet if the updating
process is interrupted, the SD card has to be inserted again and the process will carry on.
The steps of the updating process are the following:
• Updating the code of the remote control.
• Updating of the files of the remote control.
• Updating of the files of the inverters.
• Updating of the code of the inverters.
The updating process takes 3 to 15 minutes, depending on the number of inverters connected to
the remote control.
Once the update has been carried out, the remote control displays the basic screen and you have
immediate access to the new functions.
When there is a change of language, the system restarts automatically with the new language as
the current language.
If the installation consists of several remote controls, each of them has to be updated separately.
Beware: the updating will stop the running of all Xtenders connected to the remote
control.
C
OMPATIBILITY
Studer Innotec guarantees the compatibility of the software updates with the hardware for one
year, starting from the date of purchase. The updates are no longer guaranteed beyond this date
and a hardware upgrade may be required. Please contact your reseller for any additional
information on compatibility.