Sony CMR-PC2 USB - Manual (Page 13)

13
Affix the camera monitor mount to the computer display, and then pull the arm plate
open with your fingers and hook the camera onto the camera monitor mount.
Connecting the CMR-PC4 USB to a Computer
You can connect or disconnect your camera to or from the computer
while the computer is powered on. For details on the location of the
USB connector, please see the instruction manual for the computer.
Note
• Do not connect or disconnect the camera’s USB cable during startup or shut down of
Windows. This could cause your camera or computer to malfunction.
• Do not connect or disconnect the camera’s USB cable during startup or shut down of
software used with the camera. This could result in unstable operation of the computer.
Using the Camera on a Desk Top
Use the stand to place the camera on your desk or table top, and then
connect the USB cable to the USB connector on the computer.
Attaching the Camera to a Flat, Shiny Surface with the
Suction Mount
Use the suction mount to attach the camera to a windowpane or other
smooth, shiny surface, and then connect the USB cable to the USB
connector on the computer.
Camera monitor mount
Arm plate
Stand