Troubleshooting and technical support, Troubleshooting the sun blade 2500 workstation, Table – Sun Microsystems Sun Blade 2500 User Manual

Page 51: Chapter, Describes workstation tr, Oblems during power on, see, Troubleshooting the sun blade

Advertising
background image

35

C H A P T E R

4

Troubleshooting and Technical
Support

This chapter contains information to help you troubleshoot minor workstation
problems.

This chapter includes information about the following topics:

■

Troubleshooting the Sun Blade 2500 Workstation

■

How to Get Technical Assistance

Troubleshooting the Sun Blade 2500
Workstation

If you experience problems while setting up your workstation, refer to the
troubleshooting information in

TABLE

4-1

.

TABLE

4-1

Troubleshooting Procedures

Symptom

Troubleshooting

Workstation powers on,
but the monitor does
not.

1. Is the Power button for the monitor turned on?
2. Is the monitor power cord connected to a wall outlet?
3. Does the wall outlet have power? Test by plugging in another device.

System stops booting
after the
ok prompt is
displayed.

At the ok prompt type: boot
If the system does not boot, contact your system administrator or a Sun Service
Support Center.

Advertising