Troubleshooting – Samsung HMX-H204BN User Manual
Page 132
USB
Message
Icon
*OGPSNTUIBU
Action
Fail Printer
Connecting
Change 'USB
Connect'
-
A problem occurred when
connecting the camcorder
via USB to a printer.
t $IFDLUIF64#DBCMF
t 5SZUIFDPOOFDUJPOQSPDFEVSFBHBJO
t 4XJUDIiUSB connect” function to
“
1JDU#SJEHF”
Fail USB Connecting
Change 'USB
Connect'
-
A problem occurred when
connecting the camcorder
via USB to a PC.
t $IFDLUIF64#DBCMF
t 5SZUIFDPOOFDUJPOQSPDFEVSFBHBJO
t 4XJUDIiUSB connect” function to “Mass
4UPSBHF”
Ink Error
-
There is a problem with the
ink cartridge.
t $IFDLUIFJOLDBSUSJEHF
t 1VUBOFXJOLDBSUSJEHFJOUIFQSJOUFS
Paper Error
-
There is a problem with the
paper.
t $IFDLUIFQBQFSJOUIFQSJOUFS*GUIFSFJT
no paper, insert paper.
File Error
-
There is a problem with the
file.
t :PVSDBNDPSEFSEPFTOPUTVQQPSUUIJTmMF
format.
t 5SZBOPUIFSmMFSFDPSEFEPOZPVS
camcorder.
Printer Error
-
There is a problem with the
printer.
t 5VSOUIFQSJOUFSTQPXFSPGGBOEPO
t $POUBDUUIFQSJOUFSNBOVGBDUVSFSTTFSWJDF
center.
Print Error
-
A problem occurred during
printing.
t %POPUSFNPWFQPXFSTPVSDFPSFKFDU
memory card during printing.
When there is dew condensation, put the camcorder aside for a while before using
t 8IBUJTEFXDPOEFOTBUJPO
Dew condensation happens when a camcorder is moved to a location where there is a significant
temperature difference from the previous location. The dew condenses on the external or internal
parts of the camcorder, and on the reflection lens. If there is dew on or in your camcorder, it may
cause the camcorder to malfunction or damage the camcorder when you turn the power on.
t &YBDUMZXIFOEPFTEFXDPOEFOTBUJPOPDDVS
When you move the camera to a location with a higher temperature than the previous location, or
when you move it to a hot area suddenly. Examples:
- You record outside in cold weather during the winter and then move the camera in indoors.
- You record outside in hot weather after being indoors or inside a car where the A/C was
running.
t 8IBUDBO*EP
Turn the power off, detach the battery, and leave the camcorder in a dry area for 1~2 hours before
using it.
troubleshooting
120