Sony 4-125-572-12 (1) - Manual (Page 14)

14
Making a Wired Connection with a Computer
Making a Wired
Connection with a
Computer
(VPL-DX15 Only)
When you make a wired connection between
the projector and a computer, there are two
methods; peer-to-peer connection and wired
LAN connection.
1
Connect the (network/RJ45)
connector on the projector to the
network connector on a computer or
on a LAN using an Ethernet cable (not
supplied).
Peer-to-peer connection
When a peer-to-peer connection is made, set a
private IP Address (e.g. 192.168.0.1) for each
of the projector and computer.
Wired LAN connection
If the DHCP server is enabled on the
connected LAN, the IP Address is
assigned automatically.
2
Press the NETWORK key on the
remote commander.
The following menu appears:
If the assigned IP Address is displayed
under “Network Address”, the
connection is complete.
When the IP Address is not
assigned automatically
The following menu appears.
We recommend that you use the “Simple
Setting” wizard for network configuration.
Note
to (network/
RJ45) connector
Ethernet cable (cross
cable) (not supplied)
Projector
to network
connector
Computer
Ethernet cable
(straight cable)
(not supplied)
to (network/
RJ45) connector
Hub or router
LAN
Projector
SonyProj99808B8
192.168.0.1
address" and "Projector password" at
"Connect to a Network Projector" of
Windows Vista
® .
Search for a projector or enter the "Network
Network Name (SSID):
Projector Name:
Network Address:
Projector Password:
Select: Set:
Switch
Detail Information
Windows Vista ® Network Projector