Samson F800 - Manual (Page 12)

Specifications
12
F1200
1. Input Sensitivity (+0dbm ±1dbm)
2. Rated Power Output Level (1kHz THD 5% / Both CH Drive)
8 Ohm per channel 400W
4 Ohm per channel 600W
8 Ohm Bridged Mono 1200W
3. Frequency Response (0db +0.5, -1db)
8 Ohm 1W 20Hz – 20kHz
4. Total Harmonic Distortion (1/2 Power, THD
≤
0.1% at 20 – 20kHz, Both Ch Drive)
8 Ohm load 0.1%
4 Ohm load 0.1%
8 Ohm Bridged 0.1%
5. Channel Separation (input 600 Ohm short)
8 Ohm, 125W, 20Hz – 20kHz
Ch1 -> Ch2
-65dB
Ch2 -> Ch1 -65dB
6. Residual Noise
Input 600 Ohm Shunt, DIN Audio Avg on -60db
7. Signal-to-noise Ratio (Input 600 Ohm Short, DiIN Audio) 95dB
8. Voltage Gain (4 Ohm, 1kHz)
9. Indicators
Clipping LED 1kHz, THD 5%
10. DC Offset Voltage 0±100mV
11. Idle Current 10±2mV
12. Damping Factor 100
13. Dimensions 18.75
″
(w) x 11.5 (d) x 5 (h)
476.25mm (w) x 292.1 (d) x 127 (h)
(Width includes rack ears. Height does not include feet)
14. Weight 40.5 lbs
18.4 kg