Samson PA324 - Manual (Page 8)

6
Effect Select Switch (DIGITAL EFFECTS)
The EFX switch allows you to select one of the eight built-in digital effects.
Simply rotate the EFX to choose the effect.
Effect Preset List
This section identifies the eight built- in DSP effects presets.
Master Effect Send (EFX SEND)
The EFX SEND control is used to send the effect mix bus to an external effect
device connected to the EFX OUT jack.
EFX SEND 5
0 10
EFFECTS EFFECTS
5
2 6
1 7
3
0
4
DIGITAL EFFECTS
0 LARGE HALL
1 MEDIUM HALL
2 LARGE ROOM
3 VOCAL ROOM #1
4 VOCAL ROOM #2
5 CHORUS + REVERB
6 CHORUS + DELAY
7 STAIRWELL
6
7
8
6
7
8
Tape In Level Control (TAPE IN)
This adjusts the amount of signal that is sent from the TAPE IN jacks to the
MAIN bus.
Aux In Control (AUX IN)
This adjusts the amount of signal that is sent from the AUX IN jacks to the
MAIN bus.
EFX SEND 5
0 10
TAPE IN 5
0 10
AUX IN 5
0 10
9
10 10
9
Controls and Functions
TAPE IN AND AUX IN SECTION
This allows you to adjust the level of the signal from an external device such
as a cassette recorder, or CD player or from an external effect device.
FRONT PANEL CONTROLS
24 BIT DIGITAL EFFECT SECTION
The PA324 features a built-in, 24 Bit Digital Effects processor with high quality,
studio grade effects like Delay, Chorus and Reverb. The following section
describes the features of the powerful on-board DSP.