Sennheiser SK 5212 - Manual (Page 12)

11
!
The transmitter can only be switched off when the lock mode is
deactivated (see “The automatic lock mode (autolock f unction)” on
page 13).
Note:
!
When in the setting mode of the operating menu, the ON / OFF button
µ
will cancel your entry (ESC function).
Doing a frequency check
The transmitter has a frequency check mode that prevents the transmitter
transmitting on an unwanted f requency af ter switch-on.
To change the tr ansmission fr equency, pr oceed as fol lows:
̈
Rel ease the ON / OF F button
µ
.
̈
Immediately (i.e. within five seconds) press the multi-f unction
switch
¾
(switch position
țSET
) twice.
̈
You are now in the setting mode of the “ CHAN ” or “ TUNE ” menu where
you can change the transmission frequency (see “ Adjustment tips for
the operating menu” on page 21).
̈
To switch the transmitter off, pr ess the
ON / OFF button
µ
until “OFF” appears on
the LC display panel
¿
.
The red LED
·
and the LC display panel go
off.
̈
W hen switching on the transmitter , keep
the
ON / OFF button
µ
pressed.
The current frequency is displayed on the
L C display panel
¿
without the transmit-
ter actually transmitting.
̈
If the displayed frequency is the correct
one, release the
ON / OFF button
µ
.
After five seconds, “RF”
ቤ
appears on
the LC display panel and the transmitter
is transmitting.
MHz
RF
ቤ