Focus lock focus range, Focus lock, Focus range – Konica Minolta Dimage X20 User Manual
Page 26
26
R
ECORDING
-
BASIC OPERATION
FOCUS LOCK
The focus-lock function is used when you want to compose the image with the subject off-center and
outside the focus frame. Focus lock may also be used when a special focusing situation prevents the
camera from focusing on the subject. This function is controlled with the shutter-release button.
Place the subject within the monitor focus frame. Press and hold
the shutter-release button partway down to lock the focus.
• The focus signal on the monitor will indicate if the focus is
locked.
Without lifting your finger from the shutter-release button, recom-
pose the subject within the image area. Press the shutter-release
button all the way down to take the picture.
FOCUS RANGE
The focus range is 10cm (0.3ft.) to infinity. The LCD monitor can be used to frame the subject.