Kenwood KOS-V1000 - Manual (Page 62)

62 KOS-V1000
Setup Menu
User Interface
You can set up user interface parameters.
1 Display the User Interface screen
Touch [User Interface] in the SETUP Menu
(page 58).
2 Setup each item
1
2
3
4
1 Selects the background to display.
"Change": Displays images entered into
this unit. Refer to <Background
Select> (page 64).
2 Enables entering or deleting of background
images into of from this unit.
Press
to enter the USB suspend
mode, and then remove the USB device.
"Memory": Enables entering of
background images. Refer
to <Entering Background>
(page 63).
"Delete": Enables deleting of
background image entered
into this unit. Refer to
<Background Delete>
(page 64).
3 Sets whether to display the target when
touching the panel.
4 Returns to the original screen.
5
6
7
9
8
5 Sets an on-screen display of the iPod
Playback screen. ( Auto)
"Auto": Information is displayed for 5
seconds when updated.
"Manual": Information is displayed when
you touch on the screen.
6 Sets an on-screen display of the navigation
screen. ( Off )
"Auto": Information is displayed for 5
seconds when updated.
"Off": Information is not displayed.
7 Sets an on-screen display of the Video1
playback screen. ( Auto)
"Auto": Information is displayed for 5
seconds when updated.
"Manual": Information is displayed when
you touch on the screen.
8 Sets an on-screen display of the Video2
playback screen. ( Auto)
"Auto": Information is displayed for 5
seconds when updated.
"Manual": Information is displayed when
you touch on the screen.
9 Returns to the original screen.
10
11