Kodak EasyShare M1020 - Manual (Page 36)

30 www.kodak.com/go/support
Troubleshooting and support
Resetting the clock after losing power
If you turn off the power on the frame or otherwise lose power for half a day or more,
the clock time returns to the factory setting and the automatic on/off times, if set, are
disabled.
■ When you turn the frame back on, the set time screen appears on the frame.
■ Slide to set the hour. Tap the left/right arrows to highlight the previous or next
setting (hour and minutes), then slide to adjust the setting.
■ Tap OK.
The Home screen appears. The time is reset and the automatic on/off times (if set) are
re-enabled. It is not necessary to reset the on/off times.
NOTE: If you exit the set time screen without setting the time, you can manually reset the clock and
re-enable the automatic on/off times (see page 25 ). It is not necessary to reset the on/off times.
Picture frame/computer communications
Music doesn’t play. ■ Make sure the volume is turned up (see page ii ).
■ If your frame has songs you purchased, they may be protected files.
Convert the files to standard (unprotected) AAC or MP3 formats.
You set automatic
on/off but the frame
doesn’t turn on and off
at the specified times. ■ Make sure you Enabled the on/off setting after you set the times,
then press OK (not Back). See
page 25 .
■ If your frame loses power, the clock returns to the factory setting
and auto on/off times are disabled. See
Resetting the clock after
losing power, page 30 .
If... Try one or more of the following
Cannot copy pictures to my
computer. ■ Make sure your computer is on.
■ Make sure the USB cable is securely connected ( page 17 ).
■ Make sure the power button on the frame is On ( page ii ). Cannot see my frame as a
removable drive.
If... Try one or more of the following