Kyocera KM-NET - Manual (Page 6)

Installation and Startup
2 KM-NET for Direct Printing
2. Installation and Startup
2.1. Installation
Install KM-NET for Direct Printing in your computer.
Note
Before installing this utility, make sure that any of the printer drivers are installed. The
Kyocera Extended Driver is provided on the CD-ROM supplied with the printing
system.
Insert the CD-ROM that came with the printing system into the optical drive of the
computer.
The installation program starts up automatically. Follow the instructions for installation.
2.2. Startup
When the installation is completed, you can start the KM-NET for Direct Printing by
proceeding from the start menu > All Programs > Kyocera > KM-NET for Direct
Printing.