Kenwood eXcelon KDC-X492 - Manual (Page 14)

14 | KDC-X492/KDC-MP438U/KDC-MP408U/KDC-MP338
Menu Operation
Auxiliary Input Display Setting
Selects the display below when changing to
Auxiliary input source;
• “AUX”
• “DVD”
• “PORTABLE”
• “GAME”
• “VIDEO”
• “TV”
1 Select Auxiliary input display setting item
during Menu mode
Select the “NAME SET” display.
For how to select menu items, refer to <Menu
System>(page 12).
2 Enter Auxiliary input display setting mode
Press the Control knob for at least 1 second.
The presently selected Auxiliary input display is
displayed.
3 Select the Auxiliary input display
Push the Control knob towards right or left.
4 Exit Auxiliary input display setting mode
Press the [M.JOG] button.
⁄
• When operation stops for 10 seconds, the name at that
time is registered, and the Auxiliary input display setting
mode closes.
• The Auxiliary input display can be set only when the
built-in auxiliary input or the auxiliary input of optional
KCA-S220A is used. On the KCA-S220A, "AUX EXT" is
displayed by default.
Receive mode Setting
Setting the receiver mode as follows;
Receive mode Display Operation
Auto mode “AUTO” Automatically tunes to analog
broadcast when there is no digital
broadcast.
Digital “DIGITAL” Digital broadcasts only.
Analog “ANALOG” Analog broadcasts only.
1 Select Receive mode item during Menu mode
Select the “RECEIVE MODE” display.
For how to select menu items, refer to <Menu
System>(page 12).
2 Enter Receive mode
Press the Control knob for at least 1 second.
3 Set the Receive mode
Push the Control knob towards up or down.
4 Exit Receive mode
Press the [M.JOG] button.
Demonstration mode Setting
Turning the demonstration mode ON/OFF.
1 Select Demonstration item during Menu mode
Select the “DEMO MODE” display.
For how to select menu items, refer to <Menu
System>(page 12).
2 Set the Demonstration mode
Press the Control knob for at least 2 second.
Pressing this button for 2 seconds or longer toggles
the setting between ”ON” and ”OFF”.
3 Exit Demonstration mode
Press the [M.JOG] button.