Kreg Tool PRS1020 - Manual (Page 18)

2
Universal Steel Stand
Tools Required:
• Square
• 1/2” Socket wrench & extension
• (2) 3/4” Open-end or adjustable wrenches
• Phillips head driver bit
Please call us at 800-447-8638
with any questions regarding the
assembly of this stand.
www.kregtool.com • 800.447.8638
Step 5
Joining Table Top to Stand:
In this step you will be joining the Universal Steel Stand to a Kreg or other table-top of
your choice.
Place the table face-down on your work surface, and have someone help you fl ip the
stand on top of it, as shown in image A. Once the stand is centered, and all edges have
equal overhang on parallel edges, you may begin securing the two together using ¾”
wood screws (not included) and a corresponding driver, as shown in image B.
All Kreg table-top solutions come with pre-drilled holes at their base, which align with
holes in the stand. These tables-tops can be attached to the Universal Steel Stand
using the included ¾” screws. Please reference specifi c table-top instructions for
further detail. For more information on Kreg table tops, visit www.kregtool.com.
Item# KRS1030
Short Stretcher (4) Height Adjusters (4)
Long Stretcher (4)
A. B.
Levelers (4)
Parts Identifi cation:
Legs (4)
Hardware
5/16” Hex Flange Nuts (50)
1/2” Hex Flange Nuts (8)
5/16” Carriage Bolts (50)
3/4” Wood Screws (20)
Step 5 -
Final Assembly
Shown
ASSEMBLY INSTRUCTIONS
NK7563A
Mobilize your stand...
Version 20070201
Add true mobility to your Universal Steel Stand with
our Heavy-Duty Casters. Built to last and perform,
these casters feature a dual locking mechanism that
won’t roll OR pivot once engaged, resulting in an
extremely stable work station.
Item#
KRS3090