Klipsch KHC-6 - Manual (Page 2)

SYNERGY HOME SERIES
KHW-5 & KHC-6 Owner’s Manual
I M P O RTANT SAFETY INSTRU C T I O N S
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the manufacturer.
12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.
14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
This symbol indicates that there are important operating and maintenance instructions in the
literature accompanying this unit.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present
within this unit.
WARNING: Risk of Electrical Shock. Do Not Open. Voltages in this equipment are hazardous to life.
No user-serviceable parts inside. Refer all servicing to qualified service personnel.
WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture
Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids –
such as a vase of flowers – are placed on the apparatus.
WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance
with the installation instructions.
No naked flame sources – such as candles – should be placed on the product.
Caution: Changes or modifications not expressly approved by the manufacturer could void the user’s
authority to operate this device
Your new Klipsch architectural speakers have been designed to deliver great sound while remain-
ing unobtrusive wherever you install them. For optimum performance, use the KHW-5 model as
front, center or surround channels in audio or home theater applications, or as part of a distrib-
uted sound system. Use the KHC-6 model for distributed sound in kitchens, hallways or bath
rooms. They are also suitable for use as surround channels.
K H W-5 SPEAKER PLACEMENT
Designed to function in any standard wall, ceiling or drop ceiling, Klipsch in-wall speakers are
engineered for years of performance. Minimum construction requirements call for drywall or other
mounting surfaces to be at least
3 /
8
" thick.
When planning speaker placement, maximum performance is realized when speakers are placed
at equal distance from the listener and along a common wall. This helps ensure the best stereo
effect. For non-critical listening environments (or when the listening position may vary widely)
speaker placement may be wherever is most convenient, although in these cases stereo imaging
may be lost. If this option is used, Klipsch recommends using the "mono" setting on the system’s
preamplifier.
K H W-5 SPEAKER INSTA L L AT I O N
Contents Description Quantity
Speaker Modules 2
Frames 2
Grilles 2
Screws (#6 x 1 1 / 2 ) 4 (KHW-5)
Tools Required
#2 Phillips Screwdriver
Hole Saw
New Construction
1. Insert the frame into the wall opening and attach via the swinging "dog" connectors integral
with the frame.
2. At this point, you may paint the wall and frame together. You may also want to paint the
speaker grilles. Klipsch in-wall frames and grilles are designed to accept most types of paint.
Care should be taken to avoid excessive paint build-up in the grille perforations.
3. Install the module with the screws provided and press the grille in place.
Existing Construction
1. Cut the appropriate size opening in the wall using the template provided. Cutout dimensions
are provided in the "Specification" section at the back of this manual. Sizes are minimum. If
accuracy of cut (straightness/squareness) cannot be achieved, you may add
1 /
4
" to each
dimension. Be careful not to cut through any existing wiring or plumbing. Avoid compromising
any fire stops between studs.
Included in Speaker Module Carton Included in
Rough-in Kit Carton
Template Grille Baffle Frame Bracket