Kenwood XD-DV50 - Manual (Page 40)

Normal Recording (TAPE B only)
Select reverse mode
1
23 23 7
A
1 Open the door.
Press the area marked
PUSH OPEN to load or
eject a tape
2 Insert a tape.
3 close the door.
÷ Remove tape slack before loading.
÷ Close the door securely.
Select tape transport direction, Then
press the STOP (
7 ) key.
2
MAIN UNIT
1 “ ” : The recording will end and the tape will stop at the
end in reverse direction, no matter whether record-
ing was started in forward direction or in reverse
direction.
2 “ ” : In recording mode, this is the same as “ ”.
3 “ ” : Record stops after having recorded one side of tape.
Each press switches the modes as follows
Select the source to be recorded
3
÷ If the tape transport direction is opposite to the desired direction,
press the play key corresponding to this.
Tape direction indicators of
currently selected deck.
Start recording
4
REMOTE MAIN UNIT
REMOTE MAIN UNIT
÷ Start playback the source, then press the REC/ARM key.
To pause recording To stop recording
REMOTE MAIN UNIT
MAIN UNIT ONLY
MAIN UNIT ONLY
Lit
÷ Pressing the key pauses recording after leaving a non-
recorded space of about 4 seconds (ARM function).
÷ If the key is pressed again in less than 4 seconds after
it has been pressed, recording resumes from that
instant.
Preparation
This flashes quickly during
ARM and slowly during
pause.
This unit can only use tape for the normal position (Type I).
REVERSE MODE
TAPE B
23
STOP
7
23
TAPE B
STOP
VIDEO/AUX
DVD/CD TUNER
BAND
BAND
6
AUX
DVD/CD
TUNER
REC/ARM
REC/ARM
STOP
7
STOP
23 23 7
/
TAPE B
STOP STOP
4 , ¢
REVERSE MODE
TAPE B
To record a DOLBY SURROUND disc, please switch the listening mode to STEREO.