Samsung SCH-470 - Manual (Page 43)

The phone starts beeping and flashes on the display
The battery pack is insufficiently charged. Replace the pack
and recharge it fully until the lamp on the charger turns green.
The audio quality of the call is poor
Check the signal strength indicator ( ) on the display; the
number of bars indicate the signal strength from strong
( ) to weak ( ).
Try extending the antenna, moving the phone slightly or
moving closer to window if you are in a building.
No number is dialed when you recall a memory location
Check that the numbers have been stored correctly, by using
the memory scan feature (See page 32).
Re-store them in the memory, if necessary.
If the above guidelines do not enable you to solve
the problem, take a note of:
The model and serial numbers of your phone
Your warranty details
A clear description of the problem
Then contact your local dealer or SAMSUNG
Authorized Service Center.
84 85
Cumulative call time is cleared
All the phone numbers stored
in memory are cleared.
There is no phone number
stored in memory.
While the phone is restricted,
you have tried to make an
international call beginning 00.
You have entered invalid or
no time.
All the phone numbers in
redial memory are cleared.
The memory location you
chose is empty.
The phone number is not
registered in the base station.
There is no empty location
under which you can store
phone numbers.
While the phone is restricted,
you have tried to make a call by
memory dial.
A phone number stored in the
selected memory location is
c l e a r e d .
A phone number is already
stored in the selected memory
location.
LCD Messages
AIR TIME IS
C L E A R E D
ALL MEMORIES ARE
C L E A R E D
ALL MEMORIES ARE
E M P T Y
INT.CALL IS
R E S T R I C T E D
INVALID TIME
LAST CALLS ARE
C L E A R E D
LOCATION EMPTY
M A I N T E N A N C E
R E Q U I R E D
M E M . ( 0 0 - 7 9 ) I S
F U L L
MEMORY IS
R E S T R I C T E D
MEMORY USED!
CLEAR? YES
MEMORY USED!
STORE? YES