Konftel 100 - Manual (Page 7)

Calling
Konftel 100 • User Guide
7
Redial
Press the Redial key. The latest number is
dialed within 3 seconds.
To end the call, press OK.
The requirements for the operation of the Flash key vary between PBXs and
from country to country. Konftel 100 therefore lets you program the F-pulse
time so that it works with most PBXs on the market.
Hold down the Flash key for three seconds until the
green LEDs flash and you hear three short beeps.
Enter the value for the F-pulse. The default setting is 5.
Check in the table below whether the setting is right for
your PBX/country.
Value: Time: PBX/country:
1 65 ms Ericsson MD110
2 100 ms Scandinavia, Europe
3 150 ms Reserved
4 270 ms Germany, France, Israel
5 600 ms USA
Press the OK key to save the setting and exit.
1-5...
If the Flash key does not work
If your Three-way Call is not answered
Press the Flash key followed by the 1 key to
return to the first call.
Programming the Flash key
(default setting = 5)
English