Kyocera WP31C - Manual (Page 64)

3.3 Menu Map and Status Pages
3-19
3 Memory
This item shows:
• Standard memory in the printer (128 MB)
• Option memory slot status (Slots 1 and 2) in megabytes
• Total memory in the printer
• Current status of the RAM disk
4 Page Information
This item shows the page related items:
• Tone mode, Normal or Fine
• Number of copies, from 1 to 999
• Total page count
5 Installed Options
This item shows the options installed in the printer:
• Hard disk
• Option ROM
• Memory card
6 Network Status
This item shows the IP address, subnet mask address, and default gateway address for
the network interface card in the printer.
7 Emulation
This item shows all available emulations of the printer. The PCL 6 emulation is set as
default when the printer is shipped from the factory. The emulations are:
• PCL 6
• KPDL3
• KC-GL
8 Error Log
This item shows the last three instances of the following types of errors, listing them in
the order of occurrence:
• KPDL (PostScript) errors
• Memory overflow
• Print overrun
• File-not-found
The most recent error is displayed on the topmost line of Error Log. Error information
is cleared when the printer is powered off.
The error log information is intended for service purpose.
9 Consumable Status
This item shows the approximate level of remaining toner. When the value is 100, the
toner container is full. The closer to 0, the smaller the amount of remaining toner.
10 Interface Information
This information shows the emulation and the default font for all interfaces installed in
the printer.