English, Before use, Safety precaution – Kenwood LZ-651W User Manual

Page 2: 2 english

Advertising
background image

To prevent injury and/or fire, take the following precautions:

• Ensure that the unit is securely installed. Otherwise it may fly out of place during collisions and

other jolts.

• When extending the ignition or ground cables, make sure to use automotive-grade cables or

other cables with an area of 0.75mm

2

(AWG18) or more to prevent wire deterioration and

damage to the wire coating.

• To prevent short circuits, never put or leave any metallic objects (e.g., coins or metal tools) inside

the unit.

• If the unit starts to emit smoke or strange smells, turn off the power immediately and consult

your Kenwood dealer

• Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock. The liquid

crystal fluid may be dangerous to your health or even fatal.
If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap
immediately.

To prevent damage to the machine, take the following precautions:

• Make sure to ground the unit to a negative 12V DC power supply.
• Do not open the covers of the unit.
• Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also

avoid places with too much dust or the possibility of water splashing.

• Do not subject the monitor unit to excessive shock, as it is a piece of precision equipment.
• When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the

wrong rating may cause your unit to malfunction.

• To prevent short circuits when replacing a fuse, first disconnect the wiring harness.
• Do not use any screws except for the ones provided. The use of improper screws might result

in damage to the main unit.

• You cannot view video pictures whilst the vehicle is moving. To enjoy video pictures, find a safe

place to park and engage the parking brake.

• Keep a cellular phone or other things that oscillate high frequency away from this unit. If not, the

picture of the monitor may be distorted or noises may occur.

If you experience problems during installation, consult your Kenwood dealer.

If the remote control should become unresponsive, replace with
new batteries (i.e., 2 x R03).
Make sure that the batteries are inserted in the correct direction,
and do not use old batteries together with new ones.

NOTE

2CAUTION

2WARNING

Safety Precaution

2 English

Before Use

English

The illustrations of the display and the panel appearing in this manual are examples used to
explain more clearly how the controls are used. Therefore, what appears on the display in the
illustrations may differ from what appears on the display on the actual equipment, and some
of the illustrations on the display may represent something impossible in actual operation.

This video unit is set for rear passenger use only.
Use of this video unit in any front seat and/or where it may be visible to the driver may be illegal
in some states and may cause driver distraction and accident which could injure or kill you.

LZ-651W_ENG r2 03.7.25 9:50 AM Page 2

Advertising