Features of the roadmaster – Kut-Kwick RoadMaster RM80-88D User Manual

Page 3

Advertising
background image

Features of the RoadMaster®:

Model No. RM 80-88D/RM 80-187D

Cut:

88” or 187” with towed cutter option

Cutter Assembly:

1/4” thick steel cutter deck

Cutting Height:

4” to 8” height adjustment

Blades:

Three (3) 3/8” hardened alloy steel blades

Engine:

80 HP Cummins, industrial, cast iron, overhead cam, water-cooled
diesel engine

Speed:

0 to 11 mph (low/mowing range)

0 to 24 mph (high/transport range)


Slope:

0° to 31° slopes, designed with low center of gravity for safety on
slopes

20° with optional Rear Towed Cutter attached

Steering: Steering

wheel directs the two 6” x 16”, 6 ply wheels mounted on

the front of the cutter deck.

Tires:

38” x 18.00-20”, 8 ply rated tires; tractor tread tires for best
traction in rough or wet conditions

Seating: Tilting

seat

with restraining arms, to maintain level seating on

slopes

ROPS:

Four point certified Roll Over Protection System (ROPS) and
retractable seat belt

Cab:

Hard top canopy for sun protection

Oil Reservoir:

58 gallon hydraulic oil reservoir with oil/air separator, to prevent
foaming, overheating and water intrusion from condensation.

Diesel Fuel Tanks:

28 gallon; dual diesel fuel tanks on the front of the machine away
from the operator designed to fuel the engine on slopes

Options and Accessories:

Rear Towed Cutter – Cutting width: Rotary – 15’ 7" (187").

Hydraulic controls in the cab allow the operator to raise, lower and engage
the blades on each (left & right) deck independently. Towed cutter attaches or
detaches from tractor, without tools, in 1 1/2 minutes

Enclosed Hard-Panel Cab – With air conditioner and/or heater

The RoadMaster® design is patented.

Advertising
This manual is related to the following products: